-->
USB 3.0 to Gigabit 乙太網路轉接器
低功耗 USB 3.0 至 10/100/1000M/2.5G 千兆乙太網路轉接器是一款高性能、高度集成的設備,可為桌上型電腦、筆記型電腦、超級移動電腦、擴充基座、遊戲機、數位家用電器以及任何使用標準 USB 埠的嵌入式系統提供小尺寸和簡單的即插即用 2.5 Gb 乙太網網路連接功能。
LUHM325NE-C配備了強大的指令管線化RISC引擎,可處理2.0和3.0 USB超/高速/全速模式和10/100/1000M/2.5G千兆乙太網LAN的協定和控制功能,以及先進的電源管理功能和局域網喚醒功能,使LUHM325成為適合各種局域網接入應用的最佳選擇。
各項認證:
FCC認證
.FCC Part 15B Subpart B:2021(Class B)家用產品認證
IC認證
.ICES-003 Issue 7(Class B)資訊技術設備測試標準認證
醫療CE/EMC認證
.EN 55011:2016+A1:2017 (Group1,Class B) 家用低壓供電網路設備認證
.EN IEC61000-3-2:2019+A1:2021輸入電流小於等於16A的設備諧波電流發射限值認證
.EN61000-3-3:2013+A1:2019每相輸入電流等於或小於16 A的電氣和電子設備認證
.EN60601-1-2:2015醫療電氣設備和系統安全的抗擾度測試水平認證
.EN60601-1:2006/A12:2014醫療電氣設備基本安全和基本性能的一般要求認證
.IEC60601-1:2005(3rd Edition)+CORR.1:2006+CORR.2:2007+A1:2012
醫療電氣設備基本安全和基本性能的要求認證
• Single chip USB 3.0 to 2.5 Gigabit Ethernet controller
• USB Device Interface
o Integrates on-chip USB 3.0 PHY transceiver and controller to compliant to USB Spec 2.0 and 3.0
o Supports USB super/high/full speed modes.
o Supports LPM (Link Power Management), U1/U2/U3 at super speed, and L1/L2 at High Speed
o Supports CDC-NCM
o Supports CDC-ECM
• Gigabit Ethernet Controller
o Integrates 10/100/1000M/2.5Gbps Transceiver
o Supports 2.5G and LG Lite mode
o IEEE 802.3, 802.3u, 802.3ab compatible
o Supports pair swap/polarity/skew correction
o Support cross over detection and auto correction
o Supports IPv4/IPv6 packet Checksum Offload Engine to reduce CPU loading, including IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6 checksum check & generation
• Supports Wake-on-LAN Function and Rea lWoW!
• The ESD protection is ± 8KV by contact and ± 15KV by air
• Supports IEC60601 2xMOOP and 2xMOPP
• Advanced Power Management Features
• Auto detection with Extended Next Page capability (XNP)
• Compatible with NBASE-T Alliance PHY Specification
• Supports IEEE 802.1Q VLAN tagging
• Thermal management
• Support jumbo frame to 16k bytes
• Supports IEEE802.1P layer 2 Priority Encoding
• Supports power down/link down power saving
• SupportsIEEE802.as (Energy Efficient Ethernet)
• Integrated Power-on reset circuit